Provision a Yealink phone

Yealinks can be provisioned through the screen and buttons on the phone itself, or in its web interface.

Provision via the Web Interface

To provision the phone via Web Interface, the computer you are using must be on the same Local Area Network as the phone. This often means you need to be in the same office as the phone. If your network has separate networks or VLANs for phones, you will need to contact your local IT to find out how to access that network. You may want to skip to Provision via Phone Menu interface instead.

1. Press OK on the phone.
2. Note the IP address of the phone’s screen.
3. Navigate to the phone’s IP address using the web browser of your choice.
   • Type the IP address in the browser window and press enter, ie 192.168.1.121
4. The default username is admin and password is admin.
   • If the phone has previously been configured for our voice servers, the username and password has been changed. Please contact Technical Support for proper credentials.
5. Click the Settings tab, then Auto Provision.
   • For clients on our nms.mynlv.com voice servers – In the URL field, enter http://ndp.mynlv.com/cfg/
   • For clients on our miapbx01.nexogy.net servers – In the URL field, enter https://miandp.nexogy.net/cfg/
   • For clients on our nms-austtx01.onlyinthecloud.com servers – In the URL field, enter https://endpoint.onlyinthecloud.com/cfg/
   • For clients on our skygeo1.skynettelecom.net servers – In the URL field, enter http://ndp.skynettelecom.net/cfg
6. Click the Autoprovision Now button, then OK.
7. The phone will pull its new configuration file and most likely reboot.

Provision via Phone Menu interface

This method can be used on any phone, and is often easier if your phones are on a different Local Area Network than your computers.

1. Press Menu → 3 (Settings) → 2 (Advanced Settings).
2. Enter the password admin (23644466) and press Confirm.
   • Use the keypad (similar to text messaging on a cell phone).
3. Press 8 (Auto Provision).
4. Enter the Provisioning Server address for your phone system
   • For clients on our nms.mynlv.com voice servers – In the URL field, enter http://ndp.mynlv.com/cfg/
   • For clients on our miapbx01.nexogy.net servers – In the URL field, enter https://miandp.nexogy.net/cfg/
   • For clients on our nms-austtx01.onlyinthecloud.com servers – In the URL field, enter https://endpoint.onlyinthecloud.com/cfg/
   • For clients on our skygeo1.skynettelecom.net servers – In the URL field, enter http://ndp.skynettelecom.net/cfg
5. Use the keypad to type, similar to text messaging on an old flip-phone:
   • Use the ✱ (star) key for colon ( : ), slash ( / ), and dot ( . ).
   • For easier text entry, press the 2ab softkey until it says abc.
6. Press Save and OK.
7. The phone will now reboot and should come up with its new configuration.

Factory resetting the phone

In some instances, you may be instructed to Factory Reset a phone before following the provisioning instructions above.

1. Hold OK for ten seconds.
2. Press OK.
3. The phone will reset and reboot.
4. When it starts up, follow the steps above to provision the phone.